导航
Technical support
Professional and thoughtful technical support
You are here:
Homepage
/
Technical support
What parameters need to be provided at the beginning of the design in order to select a model 2023-08-23 17:10:57
Need to provide: the number of teeth of large and small pulleys, the speed of pulleys, motor power or load, etc..
PU polyurethane material characteristics 2023-08-23 17:10:54
Polyurethane elastomer (PU) is a new type of material between rubber and plastic, in practical applications as a substitute for the renewal of rubber products, due to the PU has good abrasion resistance (elastomer is the best), high strength (is 3 ~ 5 times the ordinary rubber), high elongation (500% -1500%), high elasticity (load support capacity, vibration damping effect is good), hardness range (Shore A20 ~ Shore D70); and also has oil resistance, acid resistance, alkali resistance, radiation resistance and other excellent properties. A20~Shore D70); and also has oil resistance, acid and alkali resistance, radiation resistance and other excellent properties.
The diameter of the pulley pitch circle is relative to the outer diameter 2023-08-24 17:10:57
The diameter of the pulley pitch circle is relative to the outer diameter
Belt storage 2023-11-15 14:10:43
The storage temperature should be -18 °C ~ 40 °C, and the relative humidity should not exceed 80%. The storage environment should be clean. During storage, it is necessary to avoid the deformation of the synchronous belt under excessive pressure, and it should not be folded and stacked. During storage, keep the synchronous belt away from the heat source for more than 1m and store it away from light.
Previous page
1

Leave us a message

Contact information

Company address:

Sanmen County, Zhejiang Province, Liuao Dashawan Industrial Zone

Copyright © Zhejiang Sanmen Kaitai Belt Co., Ltd.      Powered by www.300.cn​      SEO

Verification 浙ICP备2023029316号-1
img
img
img
0576-83416888
img
3416888@163.com
img
Search

TANKE